FI  |  EN
Order by product code

Type B7 - Single acting

Operating conditions Pressure:= 400 bar Temperature: -35°C...+110°C Speed:= 0,5 m/s Fluids: Hydraulic fluids (mineral oil based) Gap>e< defined according to operating conditions by using nomogram. Materials Parkers P5008 material is a polyurethane based elastomer (hardness 93 Shore A). Its main advantages in comparison with other polyurethane materials are increased heat resistance, lower compression set, and enhanced resistance to hydrolysis. Installation Seals available for ISO 5597/1 housings One piece piston normally possible (A), Two piece piston (B) Tolerances D = H9 d = h9 L = +0,25 -0 Advantages - Especially high wear resistance - Low compression set - Durable against shock loads and pressure peaks - Suitable for hardest working conditions - High resistance against extrusion - Easy installation

Please check availability from your nearest Etra Megacenter store

Novelty Buy from Webshop Product code Product name Technical name L mm Measure 1 Measure 2 Measure 3 Unit Safety PDF
80673031500 B7 P5008 80 X 70 X 12 Piston seal 13.0 80 70 12 Pcs
80673048900 B7 P5008 320 X 290 X 20 Piston seal 22.0 320 290 20 Pcs
Product added to shopping list.
Show shopping list »»